Sale
BendPak Turf Lift Accessory Kit

Fits: XPR10S and XPR-9S

The BendPak Turf Lift Accessory Kit is the most versatile utility vehicle and lawn maintenance two-post lift turf kit in existence. It fits to XPR-10S and XPR-9S two-post lifts and won’t crowd your floor while you work beneath a turf...
$3,245.00 $2,690.00
Sale
BendPak 48" Steel Approach Ramps

Fits HDS-35 & HDS-40 Series Lifts / Pair

These optional, 48" extended-length steel approach ramps lifts replace the standard-length steel approach ramps that are included with the purchase of all HD and HDS series four-post lift. Low-Profile Steel Ramps With 48" of length, BendPak’s optional Steel Ramps are...
$2,325.00 $1,795.00
Sale
BendPak Aluminum Deck

Fits HD-7PXW, HD-9XW, HD-9XL, HD-9SWX / WIDE Runway Setting / Pair

The optional aluminum deck makes every BendPak HD-7 and HD-9 series four-post lift even more versatile. It adds full-width flooring for upper-level storage and fluid protection for vehicles parked underneath. Drip-Proof, Weatherproof & Foolproof Design If you have a BendPak...
$1,530.00 $1,245.00
Sale
BendPak Aluminum Deck

Fits HD-7W, HD-9, HD-9SW / WIDE Runway Setting / Pair

The optional aluminum deck makes every BendPak HD-7 and HD-9 series four-post lift even more versatile. It adds full-width flooring for upper-level storage and fluid protection for vehicles parked underneath. Drip-Proof, Weatherproof & Foolproof Design If you have a BendPak...
$1,755.00 $1,205.00
Sale
BendPak Aluminum Deck

Fits HD-7PXN HD-7PXW, HD-9STX, HD-9XW, HD-9XL, HD-9SWX / NARROW Runway Setting / Pair

The optional aluminum deck makes every BendPak HD-7 and HD-9 series four-post lift even more versatile. It adds full-width flooring for upper-level storage and fluid protection for vehicles parked underneath. Drip-Proof, Weatherproof & Foolproof Design If you have a BendPak...
$1,410.00 $1,185.00
Sale
BendPak Aluminum Deck

Fits HD-7P, HD-7W, HD-9ST, HD-9, HD-9SW / NARROW Runway Setting / Pair

The optional aluminum deck makes every BendPak HD-7 and HD-9 series four-post lift even more versatile. It adds full-width flooring for upper-level storage and fluid protection for vehicles parked underneath. Drip-Proof, Weatherproof & Foolproof Design If you have a BendPak...
$1,350.00 $1,145.00
Sale
BendPak 48" Steel Approach Ramps

Fits HDS-18 & HDS-27 Series Lifts / Pair

These optional, 48" extended-length steel approach ramps lifts replace the standard-length steel approach ramps that are included with the purchase of all HD and HDS series four-post lift. Low-Profile Steel Ramps With 48" of length, BendPak’s optional Steel Ramps are...
$1,350.00 $1,070.00
Sale
BendPak Deluxe Alignment Turnplates (Set of 2)
BendPak’s extraordinary aluminum turnplates make our alignment lifts beefier and more accurate than ever. Larger, sturdier and featuring more underside rollers than our previous design, our latest and greatest turnplates are another great reason to choose BendPak for all wheel...
$1,125.00 $885.00
Sale
BendPak 6000AK Arm Kit

Fits P-9000LT and P-9000LTF

Easy-to-use optional arm kit fits BendPak’s P-9000LT and P-9000LTF low-rise car lift. Heavier-Duty Low-Rise Lift Arm Kit Increase your low-rise lift capabilities with the 6000AK arm kit. Designed to fit BendPak’s P-9000LT and P-9000LTF low-rise pit lifts, these 9,000-lb. capacity adapters instantly extend the reach of...
$785.00 $665.00
Sale
BendPak 43" Steel Approach Ramps

Fits HDS-14 Series Lifts / Pair

These optional, 48" extended-length steel approach ramps lifts replace the standard-length steel approach ramps that are included with the purchase of all HD and HDS series four-post lift. Low-Profile Steel Ramps With 48" of length, BendPak’s optional Steel Ramps are...
$780.00 $645.00
Sale
BendPak 48" Aluminum Approach Ramp Kit

Pair (Fits BendPak HD-9SW/SWX Lifts ONLY)

These optional aluminum approach ramps fit all BendPak HD-7 and HD-9 Series lifts and replace the standard steel approach ramps. They're particularly useful for loading low ground-clearance vehicles. Lightweight Aluminum Ramps are Preferred Among Professionals Aluminum Approach Ramps are a...
$610.00 $520.00
Sale
BendPak 48" Aluminum Approach Ramp Kit

Pair (Fits HD-7 & HD-9 Series Lifts Not HD-9SW/SWX )

These optional aluminum approach ramps fit all BendPak HD-7 and HD-9 Series lifts and replace the standard steel approach ramps. They're particularly useful for loading low ground-clearance vehicles. Lightweight Aluminum Ramps are Preferred Among Professionals Aluminum Approach Ramps are a...
$565.00 $495.00
Sale
BendPak APX-TP3 Two Post Accessory Pack
BendPak APX-TP3 Two Post Accessory Pack
$620.00 $485.00
Sale
BendPak LR-4A Arm Kit

Fits LR10000 / LR-60 and LR-60P

Easy-to-use optional arm kit attaches to BendPak low-rise lift models LR10000, LR-60 and LR-60P. Extend Low-Rise Lift Reach with this Arm Kit Finding difficult-to-reach lifting points has never been easier! Increase your low-rise lifting capabilities with the LR-4A optional Arm...
$565.00 $480.00
Sale
BendPak TC-3000 Telescoping Boat Trailer Tongue Platform

3,000-lb. Capacity

This telescoping boat trailer tongue platform makes it easy to load your boat trailer onto a BendPak four-post lift. With a 20" of travel from 48" to 68" platform length, the "third" boat trailer wheel securely fits into the TC-3000...
$630.00 $475.00
Sale
BendPak 48" Steel Approach Ramps

Fits HD-7 & HD-9 Series Lifts (Not HD-9SW/SWX) / Pair

These optional, 48" extended-length steel approach ramps lifts replace the standard-length steel approach ramps that are included with the purchase of all HD and HDS series four-post lift. Low-Profile Steel Ramps With 48" of length, BendPak’s optional Steel Ramps are...
$515.00 $465.00
Sale
BendPak DP-30 15-Gallon Rolling Drain Pan for Four-Post Lifts
Use this 15-Gallon Rolling Oil Drain Pan to perform fluid changes with your lube rack, quick-lube pit or BendPak four-post lift. Busy Shops Need This 15 Gallon Rolling Oil Drain This optional BendPak Rolling Oil Drain Pan is the perfect...
$515.00 $410.00
Sale
BendPak JP-6 Telescoping Sliding Jack Platform

6,000-lb. Capacity

This convenient sliding jack tray is capable of supporting 6,000 lbs. Designed specifically for use with four-post style runway lifts, lube racks and quick-lube pits. (Bottle jacks not included!) Our Higher-Capacity Sliding Jack Just like the JP-3 Sliding Jack Tray,...
$465.00 $370.00
Sale
BendPak 36" Aluminum Approach Ramp Kit

Pair (Fits HD-7 & HD-9 Series Lifts Not HD-9SW/SWX)

These optional aluminum approach ramps fit all BendPak HD-7 and HD-9 Series lifts and replace the standard steel approach ramps. They're particularly useful for loading low ground-clearance vehicles. Lightweight Aluminum Ramps are Preferred Among Professionals Aluminum Approach Ramps are a...
$475.00 $370.00
Sale
BendPak WSA-100 Air-Electric Workstation

Fits BendPak 2-Post & 4-Post Lifts

The handy WSA-100 utility box takes convenience to a whole new level. Whose garage couldn't use a couple extra electrical and air outlets? Mount the WSA-100 on your BendPak lift to turn it into a new one-stop hub The Perfect...
$510.00 $360.00
Sale
BendPak WSA-100 Air-Electric Work Station

Fits HD/HDS-18/27/35/40 Four-Post Lifts

The handy WSA-100 utility box takes convenience to a whole new level. Whose garage couldn't use a couple extra electrical and air outlets? Mount the WSA-100 on your BendPak lift to turn it into a new one-stop hub The Perfect...
$480.00 $360.00
Sale
BendPak 2-Post Telescoping Screw Pad

60mm Pin / Incl. Polyurethane Tuf-Pad / Set of 4

These adjustable screw lift pads give an additional 3" of lift to 9,000 and 10,000-lb. BendPak two-post lifts. Screw Pads that Adjust to Your Needs Adjustable Screw Lift Pads provide the operator with a greater level of vertical control when...
$410.00 $340.00
Sale
BendPak Portable Wheel Kit

Fits HD-7 and HD-9 Series Four-Post Lifts / SET OF 4

Mobilize your BendPak HD-7 and HD-9 series four-post lifts with this high-quality caster kit. Move your lift all around the shop and avoid inconvenient teardown and re-assembly time. Make Your Four-Post Lift Portable, and Roll On The Caster Kit is...
$455.00 $315.00
Sale
BendPak AK-14 Integrated Rolling Bridge Airline Kit for HD-18/27/35
The AK-14 integrated rolling bridge airline kit mounts and secures your airline to the bottom of your lift's runways, creating a tidy airline solution for your rolling bridge jacks. Provide Air to Two Bridge Jacks at Once Rolling bridge jacks are...
$420.00 $305.00
Sale
BendPak RJ-45 Specialty Adapter Kit

Includes (2) Sliding Pads and (2) Sliding Receivers

This four‐piece adapter set increases the service capability of the BendPak RBJ4500 rolling bridge jack by providing sliding adapters that mount on the main center tube. RBJ4500 bridge jack sold separately. Truck Adapter Kit for RBJ4500 Rolling Bridge Jack This...
$305.00 $270.00
Sale
BendPak AK-14 Integrated Rolling Bridge Airline Kit for XR Series Scissors Lifts
The AK-14 integrated rolling bridge airline kit mounts and secures your airline to the bottom of your lift's runways, creating a tidy airline solution for your rolling bridge jacks. Provide Air to Two Bridge Jacks at Once Rolling bridge jacks are...
$350.00 $260.00
Sale
BendPak AK-14 Integrated Rolling Bridge Airline Kit for HD-9/HD-14
The AK-14 integrated rolling bridge airline kit mounts and secures your airline to the bottom of your lift's runways, creating a tidy airline solution for your rolling bridge jacks. Provide Air to Two Bridge Jacks at Once Rolling bridge jacks are...
$350.00 $260.00
Sale
BendPak 2-Post Frame Cradle Pad

60mm Pin / Set of 4

If you've got a heavy vehicle to lift, especially a truck, then you're going to want a set of these BendPak frame cradle pads. Sturdy steel construction keeps the frame firmly between the cradle, while the treaded rubber mats protect...
$265.00 $235.00
Sale
BendPak 2-Post Pad

Steel / 60mm Pin / Non-Screw Type / Set of 4

Fits all BendPak two-post lift models with 35 mm or 60 mm adapter pins. Designed for high-volume shops that are constantly loading / unloading vehicles, this pack of lift pads is perfect for your BendPak two-post lift. Steel Lift Pads...
$235.00 $215.00
Sale
BendPak 2-Post Pad

60mm Pin / Incl. Polyurethane Tuf-Pad / Non-Screw Type) / Set of 4

These drop-in, non-screw type rubber lift pad assemblies outfit your BendPak two-post lift with extra carriage-gripping capabilities. Textured surface reduces migration, and the drop-in design makes installation a snap. BendPak Lift Pads are Drop-n'-Go The round Lift Pad Assembly is...
$235.00 $215.00
Sale
BendPak 2-Post Pad

35mm Pin / Incl. Polyurethane Tuf-Pad / Non-Screw Type) / Set of 4

These drop-in, non-screw type rubber lift pad assemblies outfit your BendPak two-post lift with extra carriage-gripping capabilities. Textured surface reduces migration, and the drop-in design makes installation a snap. BendPak Lift Pads are Drop-n'-Go The round Lift Pad Assembly is...
$245.00 $200.00
Sale
BendPak 2-Post Frame Cradle Pad

35mm Pin / Set of 4

If you've got a heavy vehicle to lift, especially a truck, then you're going to want a set of these BendPak frame cradle pads. Sturdy steel construction keeps the frame firmly between the cradle, while the treaded rubber mats protect...
$240.00 $200.00
Sale
BendPak 2-Post Pad

Steel / 35mm Pin / Non-Screw Type / Set of 4

Fits all BendPak two-post lift models with 35 mm or 60 mm adapter pins. Designed for high-volume shops that are constantly loading / unloading vehicles, this pack of lift pads is perfect for your BendPak two-post lift. Steel Lift Pads...
$230.00 $195.00
Sale
BendPak JP-3 Fixed Sliding Jack Tray

FITS NARROW RUNWAY POSITIONS ONLY

This convenient sliding jack tray is capable of supporting 3,000 lbs. Designed specifically for use with four-post style runway lifts, lube racks and quick-lube pits. (Bottle jacks not included!) Place Between Four-Post Lift Runways for Safe Frame Engagement This optional...
$215.00 $175.00
Sale
BendPak 2-Post Tall Adapter

5.5" (125 mm) Height / 60 mm Pin / SET OF 4

BendPak's tall adapters are part of our two-post lift adapter kit. Made to fit 60 mm lift pad assemblies. Tall Adapters are Ideal for High Ground-Clearance Vehicles Adapter Pins are great for altering the height of your two-post lift to reach even...
$185.00 $150.00
Sale
BendPak Offset Pad Adapter

35mm Pin / Set of 4

Offset adapter design allows operators to easily position lift points without the need for constant arm tube adjustment. Offset Adapters for Fast, Easy Lift Arm Adjustments Making minor adjustments to your lift pads is a snap with BendPak’s two-post lift...
$165.00 $130.00
Sale
BendPak 2-Post Medium Adapter 60 mm Pin

2.75" (63 mm) Height / SET OF 4

BendPak's 60 mm medium adapters are part of our two-post lift adapter kit. We offer individual extras and replacements. Medium Adapters for Versatile Vehicle Lifting Adapter Pins are great for altering the height of your two-post lift to reach even the most...
$160.00 $130.00
Sale
BendPak 2-Post Frame Cradle Pad

60mm Pin / Fits Wide Frames / Set of 2

If you’re lifting the biggest trucks around, you know you need specialty equipment. That’s why we made these ALI Certified wide frame cradle pad adapters to safely and securely hold commercial heavy-duty truck frames on a two-post lift. BendPak’s wide...
$150.00 $130.00
Sale
BendPak 2-Post Low Adapter 60 mm Pin

2" (52 mm) Height / SET OF 4

BendPak's 60 mm low adapters are part of our two-post lift adapter kit. Individual replacements and extras are available. Low Adapters Perfect for Low-Stance Vehicles Adapter Pins are great for altering the height of your two-post lift to reach even the most...
$130.00 $110.00
Sale
BendPak Tuf-Pad Two-Post Lift Pad

Slip Over / ROUND / Set of 4

These polyurethane tuf lift pads outfit your BendPak two-post lift with extra carriage-gripping capabilities. Textured surface reduces migration, and the slip-over design makes installation a snap. Round design offers extra multi-directional grip. Longer-Lasting, Professional-Grade Contact Pads BendPak’s round Polyurethane Tuf‐Pads™...
$90.00 $70.00
Sale
BendPak Rubber Lift Pad

Slip-Over / Square / SET OF 4

These replacement rubber lift pads outfit your BendPak two-post lift with extra carriage-gripping capabilities. Textured surface reduces slipping, and the slip-over design makes installation easy. Thick Pads for Constant Action These replacement square Rubber Lift Pads for two-post lifts are made with...
$85.00 $65.00
Sale
BendPak Plastic Drip Trays

Fits HD-7 and HD-9 Series Lifts / SET OF 2

A lightweight, cost-effective solution to drips, these drip trays will catch harmful fluids and keep them in one place to protect your vehicles and garage flooring. Sold in sets of two. Two Splash-Resistant Drip Trays Polypropylene Drip Trays from BendPak...
$85.00 $65.00
You have successfully subscribed!
This email has been registered